MAKISHINKO ALL PRODUCTS GUIDE
316/390

JACKE-1091. Upon power on, display acting mode.2. Select desired program item by MODE key.3. Select item by the first figure key of each figure key, or set up figure by figure.4. Setting value will be memorized automatically after 3 second of completion of set up. Also automatically memorized setting value if changed the mode with MODE key or DISP key654321PWRESETMODEDISP654321RESETMODEDISP654321RESETMODEDISP654321RESETMODEDISP654321PWRESETMODEDISP654321PWRESETMODEDISP654321RESETMODEDISP654321RESETMODEDISP654321PWRESETMODEDISP654321PWRESETMODEDISP654321PWRESETMODEDISP654321PWRESETMODEDISPPrimary set up methodRelease the key protect terminal when conduct primary set up according to the program. Start to input program mode by operating MODE key in front. After started to program model, the setting item of program model will be changed by pressing MODE key. Select setting item and set up content by each figure key. Pre scale set up methodSet pre reversion by program mode. Must keep key protection terminal in releasing state when setting.Pre scale set up method The calculation of pre scale value (PS value) is: The setting range is 0.001-99.999, Example:1. Display 1 with 10 pulse: PS value is 0.1. 2. Display 1 with 5 pulse: PS value is 0.2 3. Display 2 with 1 pulse: PS value is 2Pre scale set up methodPre set at acting mode status. When setting pre set prohibition for set up of key protect level, operation must be started after released key protect terminal.1. Upon power on, display acting mode.2. Display pre scale setting indication (display PS) by MODE key. The set value is 1.000 when leave factory.3. Input desired pre value by each figure key 1-5.4. Setting value will be memorized automatically after 3 second of completion of set up. Also automatically memorized setting value if changed the mode with MODE key or DISP key.1. Start to indicate acting mode upon switch on. Change to acting model with DISP key when changed to program mode.2. In case of double setting type, display set 1 and set 2 with DISP key. Above is indication of set 2.3. Input desired value by figure key. For minus setting, it can be indicated(-) display by most upper figure key.4. Desired value will be memorized in 3 second after released hand from figure setting key, then completion.PS value = Desired display value Input pulseElectronic counter

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer9以上が必要です