MAKISHINKO ALL PRODUCTS GUIDE
23/390

A-22MAKIACE10・3020・40・605010・3020・40506010・3020・40506010・15・3020・4025・506010・15・3020・4025・506010・15・3020・4025・506010・15・3020・4025・506010・15・3020・4025・506010・15・3020・4025・506010・15・3020・4025・5060324050638010012514016025SizeReduction ratio※Output shaft backlashRadian display(×10-3rad.)Angle display(deg.)Backlash standard table (BS721 5 class)7.85~12.20.45~0.707.15~11.30.41~0.656.62~10.60.38~0.612.27~8.030.13~0.462.27~7.680.13~0.442.27~7.500.13~0.432.27~7.330.13~0.422.09~6.810.12~0.391.92~6.810.11~0.371.92~6.110.11~0.351.92~6.110.11~0.351.75~5.590.10~0.321.57~5.060.09~0.291.57~4.890.09~0.281.57~4.710.09~0.271.57~4.890.09~0.281.57~4.360.09~0.251.40~4.190.08~0.241.40~4.010.08~0.231.40~4.190.08~0.241.22~3.840.07~0.221.22~3.490.07~0.201.22~3.490.07~0.201.22~3.670.07~0.211.22~3.320.07~0.191.05~3.140.06~0.181.05~2.970.06~0.171.22~3.320.07~0.191.05~2.960.06~0.171.05~2.790.06~0.161.05~2.620.06~0.151.05~3.140.06~0.181.05~2.790.06~0.161.05~2.620.06~0.150.87~2.440.05~0.141.05~2.970.06~0.171.05~2.620.06~0.150.87~2.440.05~0.140.87~2.270.05~0.13BacklashStandard specification※Output shaft backlash of each size becomes the maximum value of standard table except the thrust on the inputshaft.MA and MAO allowable thrust load on the output shaftAllowable thrust load(N)Size253240506380100125140160725784980372441165880686098001078012740

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer9以上が必要です