MAKISHINKO ALL PRODUCTS GUIDE
11/390

OHL coefficient Selection of foOverhang load coefficient tableActual overhang load calculationTe:Equivalent output torque(N・m)Lr=Te・for:Rudius (m) of a rotating body like a sprocketrfo:OHL coefficientLr:Actual overhang load(N)Equivalent allowable overhang load (OHL) calculationLc:Allowable overhang load (N)Le:Equivalent allowable overhang load(N)R:Distance from the center of the output shaft to the bearing fulcrum(mm)Rx:Distance from the point where the load is applied to the center of the output shaft(mm)Size Rof the output shaft and allowable overhang loada)When OHL acts outward from the center of the output shaftLe=Lc・RR+Rxb)When OHL acts inward from the center of the output shaftLe=Lc・RR-Rxc)When OHL acts on the center of the output shaftLe=LcSizeDimensionRAllowable OHL Le(N)(㎜)Lc(N)2525.004233233.0015604042.0020505052.0029406363.5044108075.20784010089.9011760125106.2517640140123.2522540160127.2524500OK if Le≧Lr. If Le

元のページ 

10秒後に元のページに移動します

※このページを正しく表示するにはFlashPlayer9以上が必要です